Clarke 6266315, Operation & Maintenance Instructions Manual, Page: 8 / 12

8
CONNECT THE CHARGER TO THE BATTERY
1. Connect the red battery clamp to the positive
(+ve) battery terminal.
2. Connect the black clamp to the negative (-ve)
terminal.
• Make sure that both connections are secure and NOT
touching each other.
3. Select the battery type (normal or gel cell) using
the selector switch.
4. Select the charging speed required (trickle
charge or fast charge).
CHARGE THE BATTERY
1. Plug in the charger and switch ON at the mains
supply to commence charging.
• When charging is complete, the green Fully Charged
LED will light up. The charger may be left
connected, it will monitor the battery and
provide a top up charge when necessary.
DISCONNECTING THE CHARGER
1. Switch OFF at the mains supply
• Remove the black clamp from the negative (-ve)
terminal first,
• Then remove the red clamp from the positive (+ve)
terminal.
2. Reconnect the battery to the vehicle.