manualshive.com logo in svg

Clarke 6266315, Operation & Maintenance Instructions Manual, Page: 3 / 12

Share
Download
Clarke 6266315 Operation & Maintenance Instructions Manual Download Page 3

3

SAFETY PRECAUTIONS

• IMPORTANT: ALWAYS disconnect the battery from the 

vehicle BEFORE connecting the charger leads. This is 
to prevent damage being caused to the vehicle 
electronic system.

• This battery charger is designed for INDOOR use ONLY. 

Do not use outdoors, exposed to the elements.

• Do not use for any other type of battery, or supply 

power to low voltage electrical systems.

• Connect the battery clamps to the battery terminals 

before plugging the charger in to the mains power 
supply.

• This battery charger is limited to use with 12V lead 

acid/ gel including MF (Sealed) and Leisure 
batteries ONLY. DO NOT attempt to charge other 
types of battery.

• Do not attempt to charge a battery with a capacity 

exceeding that indicated in the ‘Specifications’.

• Do not operate the charger if any of the cables are 

damaged. Consult your Clarke dealer for repair or 
replacement of the parts. 

• Do not operate the charger if the case is damaged. 

Consult your Clarke dealer for inspection and repair.

• Do not disassemble the charger, incorrect reassembly 

may result in electric shock or fire.

Summary of Contents for 6266315













Reviews:

No comments