4
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
9. Always consult the vehicle manufacturers instructions for disconnecting /
charging the vehicle battery.
ELECTRICAL CONNECTIONS
Connect the three core mains cable to a suitable industrial supply isolator, or
heavy duty plug meeting the requirements of BS EN 60309. This charger must
be connected to a supply having a rated capacity of greater than 13 Amps.
Connect the three core mains lead to a suitable industrial supply isolator or
heavy duty plug. This charger must be connected to a supply having a rated
capacity of greater than 13 Amps. A normal 13 Amp (BS1363) plug must NOT
be used.
NOTE: The maximum input current for this unit is 48 amps.
WARNING: THIS APPLIANCE MUST BE EARTHED.
IMPORTANT: The wires in this mains lead are coloured in accordance with
the following code:
GREEN AND YELLOW
-
EARTH E
BLUE
-
NEUTRAL (N)
BROWN
-
LIVE (L)
As the colours of the flexible cable of this appliance may not correspond with
the coloured markings identifying terminals in your plug, proceed as follows:
• Connect GREEN AND YELLOW coloured cable to plug terminal marked
letter “E” or Earth Symbol or coloured or Green and Yellow.
• Connect BROWN cable to the plug terminal marked letter ‘L’ or
coloured Red.
• Connect BLUE cable to the plug terminal marked letter “N’ or coloured
Black.
CAUTION: SOME ELECTRONIC EQUIPMENT CAN BE DAMAGED BY
CHARGING OR USE OF START FACILITY. CHECK YOUR VEHICLE
HANDBOOK BEFORE USING YOUR STARTER/CHARGER. IF IN DOUBT
CONSULT THE VEHICLE MANUFACTURER.
Summary of Contents for 6261067
Page 16: ......
