14
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
OPENING THE SIDE PANEL
IMPORTANT: Ensure that the welder is not connected to the mains supply.
1. Open the side panel, by pushing
the latch down and allowing the
side panel to drop down.
2. Remove any loose items that
have been transported inside
such as the handle, wheel kit etc.
THE WELDING SHIELD
1. Push the two halves of the shield
together as shown, making sure
the hooks and pins on the side
engage correctly.
2. Place the handle into position
and secure using the plastic nut
provided.
3. Working from the inside of the
shield, insert the clear glass panel
into the recess in the shield,
followed by the dark glass panel.
• The clear glass must be inserted
first.
4. Insert the two plastic screws to
clamp the glass panels from the
inside of the mask.
When replacing the glass panels,
only use parts supplied by Clarke International. The dark panel is a certified,
specific optical class and should not be exchanged for any other type.
5. The clear glass panel should be replaced when it becomes badly pitted.
Summary of Contents for 6014505
Page 32: ......
