9
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
A comprehensive range of CLARKE safety equipment for use when welding is
available from your local dealer. See page 28.
Consideration should be given to shielding the supply cable of permanently
installed welding equipment, in metallic conduit or equivalent. Shielding
should be electrically continuous throughout its length.
The shielding should be connected to the welding power source so that good
electrical contact is maintained between the conduit and the welding power
source enclosure.
The welding equipment should be routinely maintained according to the
manufacturer’s recommendations. All access and service doors and covers
should be closed and properly fastened when the welding equipment is in
operation. The welding equipment should not be modified in any way except
for those changes and adjustments covered in the manufacturer’s
instructions. In particular, the spark gaps of arc striking and stabilizing devices
should be adjusted and maintained according to the manufacturers
recommendations.
SAFETY SYMBOLS
The following symbols may be displayed on the machine.
Read this instruction
booklet carefully
before use.
Do not expose to rain.
Wear welding mask
Recycle unwanted
materials under WEEE
Directive
Wear protective gloves
General Hazard
Wear a dust mask
Warning;- magnetic
field created
Summary of Contents for 6012100
Page 32: ......
