background image

8/11

A - 3

 56091031 - BEXT Pro 100, 400

REVISED DATE

ENGLISH

INSTRUCTIONS FOR USE

INTRODUCTION

This manual will help you get the most from your Clarke

 carpet extractor.  Read it thoroughly before operating the machine.

This product is intended for commercial use only.

PARTS AND SERVICE

Repairs, when required, should be performed by your Authorized Clarke Service Center, who employs factory trained service personnel, and 
maintains an inventory of Clarke original replacement parts and accessories.

Call the CLARKE DEALER named below for repairs or service.  Please specify the Model and Serial Number when discussing your machine.

MODIFICATIONS

Modi

fi

 cations and additions to the cleaning machine which affect capacity and safe operation shall not be performed by the customer 

or user without prior written approval from Nil

fi

 sk-Advance Inc. Unapproved modi

fi

 cations will void the machine warranty and make 

the customer liable for any resulting accidents.

NAMEPLATE

The Model Number and Serial Number of your machine are shown on the Nameplate, located at the rear of the machine on the base.  This information 
is needed when ordering repair parts for the machine.  Use the space below to note the Model Number and Serial Number of your machine for future 
reference.

MODEL ________________________________________________

SERIAL NUMBER ________________________________________

UNCRATING THE MACHINE

When the machine is delivered, carefully inspect the shipping carton and the machine for damage.  If damage is evident, save the shipping carton so 
that it can be inspected.  Contact the Clarke Customer Care Department immediately to 

fi

 le a freight damage claim.

 

 WARNING!

The Products sold with this Manual contain or may contain chemicals that are known to certain governments (such as the State of 
California, as identi

fi

 ed in its Proposition 65 Regulatory Warning Law) to cause cancer, birth defects or other reproductive harm.  In 

certain locations (including the State of California) purchasers of these Products that place them in service at an employment job site 
or a publicly accessible space are required by regulation to make certain notices, warnings or disclosures regarding the chemicals 
that are or may be contained in the Products at or about such work sites.  It is the purchaser’s responsibility to know the content of, 
and to comply with, any laws and regulations relating to the use of these Products in such environments.  The Manufacturer disclaims 
any responsibility to advise purchasers of any speci

fi

 c requirements that may be applicable to the use of the Products in such 

environments.

PDFill PDF Editor with Free Writer and Tools

Summary of Contents for 56105308 (100)














Reviews: