5
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
POSITIONING THE SECURITY LIGHT ON SITE
For best effect, the light should be positioned so that the motion sensor covers
the approach to your doors and/or driveway and the light will come on when
you come home at night. It can also be used to illuminate a patio or any
potentially hazardous area such as stairways and swimming pools.
If improved security is a priority,
position the light to cover all the
approaches to your house, including
gateways, patio doors, any darker
areas, and around trees and bushes.
It is best to mount the light 2.5m
above the ground and position it so
that most personnel movement will
occur from left to right, across the
detection zone rather than moving
directly toward the detector.
MOUNTING THE LIGHT
The unit can only be installed horizontally, not vertically, using its integral
bracket. Do not mount the light to a ceiling.
The light is to be mounted so that the
angle of inclination after adjustment is
will aim the light beam at the ground
within the 10m maximum range of the
light.
Secure the fixing bracket to a wall or
suitable structure with two screws or
bolts at a minimum height of 2.5m.
The distance between the light and
the area to be illuminated is to be at
least 1m. In case you position the unit under a canopy, a minimum distance of
0.2m, measured from the top of the lamp to the under side of the canopy, is
required.
