4
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
SAFETY PRECAUTIONS
1. This unit must be installed to the requirements/wiring regulations of BS6761.
2. Before moving your security light or replacing a broken part, always ensure
that the power supply is disconnected.
3. This unit must not be immersed in water.
4. Do not handle your security light to replace broken parts with wet hands, or
when standing on a wet or damp surface or in water. Always ensure the
power supply is disconnected at the mains.
5. Do not install this light in hazardous locations, such as flammable or
explosive environments.
6. Do not look directly into the security light when switched on as this can
damage the eyes.
7. A Residual Current Device (RCD) must be used in conjunction with your
security light.
8. Do not use this security light if it has a broken lens, casing or damaged
supply cable.
9. Always ensure that the front and the top of the security light is installed at a
suitable distance from any flat or fixed surface. See Mounting the Light on
page 5.
10. Please read all of the safety and operating instructions carefully before
using this product. The following safety symbols may be found on the
product.
Read this instruction
booklet carefully
before use.
Always replace broken
glass.
