manualshive.com logo in svg

Clarke 3503596, Assembly Instructions Manual

Share
Download
Clarke 3503596 Assembly Instructions Manual Download Page 2

2

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

INTRODUCTION

Thank you for purchasing this CLARKE XX Large Garage/Workshop.

Before attempting to use this product, please read this manual thoroughly and 
follow the instructions carefully. In doing so you will ensure the safety of yourself 
and that of others around you, and you can look forward to your purchase 
giving you long and satisfactory service.

SPECIFICATIONS

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12 
months from the date of purchase. Please keep your receipt which will be 
required as proof of purchase.

This guarantee is invalid if the product is found to have been abused or 
tampered with in any way, or not used for the purpose for which it was 
intended.

Faulty goods should be returned to their place of purchase, no product can 
be returned to us without prior permission.

This guarantee does not effect your statutory rights.

Cover

305g Polyethylene, UV protected

Assembled dimensions

40 ft long x 16 ft wide x 14.5 ft high
(12 m x 4.9 m x 4.3 m)

Frame

Round steel tubing, powder coated

Securing hardware

Easy hook anchors

Weight

423 kgs

Summary of Contents for 3503596





















Reviews:

No comments

Brands by name

Popular brands

Load more brands