manualshive.com logo in svg

Clarke 3503596, Assembly Instructions Manual

Share
Download
Clarke 3503596 Assembly Instructions Manual Download Page 19

19

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

MAINTENANCE

1. The cover can be cleaned with soap and water.

2. Check and tighten the turnbuckles and all hardware as needed if the 

garage is in regular long term use. You may need to remove and re-set the 
turnbuckles to allow for more strap material becoming wound around the 
spindle.

3. Check that all ground anchoring is secure and shows no sign of 

movement.

4. To dismantle, execute all instructions in reverse order.

5. Store your garage in a cool, dry location between seasons to prolong the 

usable life of all components. Components are not equally durable and 
may require replacement over time at differing intervals.

WARNING: IF POSITIONING THE GARAGE IN A WINDY LOCATION 
ALWAYS ENSURE THE FRONT DOOR IS KEPT FULLY CLOSED TO PREVENT 
WIND LIFTING IT FROM INSIDE.

WARNING: SERIOUS INJURY TO PERSONS OR PROPERTY COULD RESULT IF 
THE GARAGE IS NOT SECURELY ANCHORED.

Summary of Contents for 3503596





















Reviews:

No comments

Brands by name

Popular brands

Load more brands