10
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
ASSEMBLY
FILLING THE CHAINSAW WITH OIL
A small bottle is supplied and must be poured into the chainsaw as follows
before use.
1. Place the chainsaw on a stable,
level surface.
2. Unscrew and remove the oil filler
cap.
3. Using a funnel, fill the oil tank with
chainsaw oil (supplied).
• The oil tank will hold 135cc of
chain oil, enough to lubricate
the chain for 12-15 minutes of
sawing.
4. Refit the oil filler cap.
5. Wipe up any spillage before continuing.
6. The oil level should be checked frequently during use and topped up as
necessary.
• Chainsaw oil is avainable from your Clarke dealer (part number
3050865)
WARNING: FOR YOUR SAFETY AND THE SAFETY OF OTHERS MAKE SURE
THAT YOU HAVE READ AND UNDERSTOOD ALL THE SAFETY WARNINGS
BEFORE CONTINUING WITH THIS SECTION.
WARNING: ENSURE THAT THE CHAINSAW IS DISCONNECTED FROM THE
MAINS SUPPLY DURING ALL CHECKS AND ADJUSTMENTS IN THIS SECTION
CAUTION: YOU MUST ONLY USE CHAINSAW OIL WITH THIS CHAINSAW.
USING DIFFERENT OIL MAY CAUSE DAMAGE AND INVALIDATE YOUR
WARRANTY.
Summary of Contents for 3402072
Page 28: ......
