background image

3

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

IMPORTANT

Please read all of the safety and operating instructions carefully before using 
this product. The following safety symbols may be found on the product.

GENERAL SAFETY RULES 

GGENERAL SAFETY IN THE WORKPLACE

1. Always keep work area clean & tidy. Cluttered work areas and benches 

invite accidents.

2. Never over-reach. Keep proper footing and balance at all times.

3. Never store equipment in a wet/damp environment or expose to rain.

4. Always ensure the workplace is well lit. Ensure that lighting is placed so that 

you will not be working in your own shadow.

5. Keep other persons away. Do not let persons, especially children, not 

involved in the work, touch the tool or extension cable and keep them 
away from the work area.

6. Never operate a power tool when under the influence of alcohol, drugs or 

medication.

7. Stay alert, watch what you are doing, use common sense and do not 

operate the power tool when you are tired.

Read this instruction 
booklet carefully 
before use.

Wear protective gloves

Wear eye protection

Wear dust mask.

WARNING: WHEN USING ELECTRIC TOOLS, BASIC SAFETY PRECAUTIONS 
SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC 
SHOCK AND PERSONAL INJURY INCLUDING THE FOLLOWING. READ ALL 
THESE INSTRUCTIONS BEFORE ATTEMPTING TO OPERATE THIS PRODUCT 
AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Summary of Contents for 3400764













Reviews: