4
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
• Moving to another work area.
• Passing the sander to another person.
14. Never use the tool if it is defective or operating abnormally.
15. The tool should be serviced if required, by qualified service personnel.
16. Avoid damaging the sander for example, by applying excessive force of
any kind.
17. ALWAYS maintain this tool with care. Keep it clean for the best and safest
performance.
18. Quick change couplings should not be located at the tool. They add
weight and could fail due to vibration.
19. Do not force or misuse the tool. It will do a better and safer job at the rate
for which it was designed.
20. This tool vibrates with use. Vibration may be harmful to your hands or arms.
Stop using the tool if discomfort, a tingling feeling or pain occurs. Seek
medical advice before resuming use.
SANDER-SPECIFIC SAFETY RULES
1. Inspect the sanding belt before use. Do not use if frayed.
2. Avoid contact with the moving sanding belt and wear suitable gloves to
protect the hands.
3. Never run the sander unless the abrasive belt is applied to the workpiece.
4. Beware of potentially explosive atmospheres being caused by dust / fumes
resulting from sanding and used dust extraction systems where possible.
5. Always wear a face mask when using the sander as protection from
airborne particles of sanded material. Avoid disturbing existing dust and
minimise the scattering of dust in the workplace environment. Take steps to
control the dust at the point of emission.
TRANSPORTATION
1. Never carry the sander by the air supply hose.
2. Never carry the sander with your finger on the trigger.
Summary of Contents for 3120179
Page 16: ......
