2
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
INTRODUCTION
Thank you for purchasing this CLARKE Long Bed Sander. The CAT49 Sander is
ideal for use in garages and workshops. The reciprocating (non-orbital) action
is ideal for flatting over large areas.
When unpacking the tool, any damage or deficiency should be reported to
your CLARKE dealer immediately.
Your sander has been designed to give long and trouble free service. If,
however, having followed the instructions in this booklet carefully. Before
attempting to use this product, please read this manual thoroughly and follow
the instructions carefully. In doing so you will ensure the safety of yourself and
that of others around you, and you can look forward to your purchase giving
you long and satisfactory service.
SPECIFICATION
Please note that the details and specifications contained herein are correct
at the time of going to print. However Clarke International reserve the right to
change specifications at any time without prior notice
Model Number
CAT49
Part Number
3110535
Min. Hose Size (ID)
3/8” BSP
Max Operating Pressure
90 psi (6.2 bar)
Air Consumption
average 8 cfm
Max No Load Speed
2,100 strokes/min @ 90psi
Air Inlet Size
1/4“BSP
Sound Pressure Level (LpA dB)
91 dB(A)
Sound Power Level (LwA dB)
104 dB(A)
Uncertainty Factor
3 dB
Vibration Levels
8.4 m/s
2
(uncertainty factor K= 1.5 m/s
2)
Weight 2.8
kg
Sanding Pad Size
70 x 400 mm
