5
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
9. ALWAYS disconnect from the air supply when changing bits or when the
wrench is not required for immediate use in order to avoid accidental
starting.
10. ALWAYS
store this product in a dry, secure place out of reach of children or
untrained users.
11. ALWAYS use both hands to control the impact wrench.
12. ALWAYS ensure the wrench has stopped before putting it down after use.
TRANSPORTATION AND STORAGE
1. Never carry the tool by the air supply hose.
2. Never carry the tool with your finger on the trigger.
3. When not in use the tool should be disconnected from the air supply and
stored in a dry place out of the reach of children (preferably in a locked
cabinet).
4. Avoid storing the tool in environments where the temperature is below 0
o
C.
5. Additionally, please keep these instructions in a safe place for future
reference.
BEFORE USE
NOTE:
Ensure the compressor is turned off.
1. Remove the blanking plug from the inlet connection of the tool.
2. If required, connect an in-line mini oiler to the tool.
• A mini oiler helps to prolong the life of the air tool.
3. If a mini-oiler is not being used, run a few drops of oil through the tool
before use. It can be entered through the air inlet or via the hose at the
nearest connection to the air supply.
4. Connect a suitable hose to the air inlet as shown.
5. Connect the other end of the hose to the compressor.
Your air tool is now ready for use. You can fit a whip hose with a quick fit
coupling if required (available from your Clarke dealer).
WARNING: COMPRESSED AIR CAN BE DANGEROUS. ENSURE THAT YOU
ARE FAMILIAR WITH ALL PRECAUTIONS RELATING TO THE USE OF AIR
COMPRESSORS AND COMPRESSED AIR SUPPLIES.
Summary of Contents for 3110432
Page 20: ......
