6
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
MOVING THE AIR COMPRESSOR
Before moving the compressor, switch off and disconnect it from the mains
power supply.
• Always use the handle.
• Only move the compressor when it is switched off.
• Do not lift by (or put strain on) fittings, valves or hoses.
• Take care when moving the compressor to avoid damaging the
valves or fittings.
BEFORE USE
Before connecting your compressor to the mains supply, check the following:-
• Make sure that the ON/OFF
switch is in the OFF (pressed
down) position.
• Make sure the compressor is on
level ground.
• Check that the mains voltage is
the same as that shown on the
data label on the compressor.
CHECK THE OIL LEVEL
NOTE:
The compressor is supplied without any oil inside, there will also be
a transit plug inserted into the oil reservoir, which must be
removed and the dipstick supplied inserted in its place.
1.
Remove the dipstick from the oil
reservoir.
Summary of Contents for 2322020
Page 20: ......
