7
Parts & Service: 0871 410 1270 / e-mail: [email protected] or [email protected]
BEFORE USE
Before connecting your compressor to the power supply, check the following:-
• Push down the OFF button.
• Remove the protective plastic
moulding from the top of the
cylinder head.
• Make sure that the compressor
is on level ground.
• Make sure that the supply
voltage matches the voltage
shown on the data label.
CHECK THE OIL LEVEL
1. Remove the dipstick from the oil
reservoir.
2. Ensure the oil level is between the
min and max marks on the
dipstick.
• Only use ISO100 (SAE30)
compressor oil, available from
your Machine Mart dealer, -
Part No. 3050796.
• Take care not to exceed the
maximum mark.
Summary of Contents for 2245306
Page 20: ......
