background image

2

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

INTRODUCTION

Thank you for purchasing this CLARKE 9L Oil / Fluid Extractor.

This product is suitable for extracting Water, Oils and liquids, Motor Oil, Brake 
Fluid, Antifreeze,

THIS PRODUCT IS NOT SUITABLE FOR EXTRACTING, PETROL OR DIESEL

Before attempting to use this product, please read this manual thoroughly and 
follow the instructions carefully. In doing so you will ensure the safety of yourself 
and that of others around you, and you can look forward to your purchase 
giving you long and satisfactory service.

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12 
months from the date of purchase. Please keep your receipt which will be 
required as proof of purchase. 

This guarantee is invalid if the product is found to have been abused or 
tampered with in any way, or not used for the purpose for which it was 
intended.

Faulty goods should be returned to their place of purchase, no product can 
be returned to us without prior permission. 

This guarantee does not effect your statutory rights.

SAFETY SYMBOLS

Refer to instruction 
manual

Wear protective gloves

Wear eye protection

Wear protective mask

Summary of Contents for 1801928













Reviews: