4
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
4. Squeeze the trigger of the spray
gun to start spraying.
5. If spraying continuously, squeeze
the trigger and engage the
trigger lock by sliding it back with
your thumb.
6. Pump the operating arm when
necessary to maintain pressure.
• The sprayer will require regular
re-pressurising approx every
0.3-0.5L to maintain the optimum output pressure.
7. Secure the operating arm in its retaining clip when not in use. Likewise
attach the lance to the clip on the operating arm.
MAINTENANCE
AFTER USE
After use, the sprayer should be flushed thoroughly with clean water to avoid
the possibility of blockages from product residue, or any cross-contamination
between different products.
After extensive use, unscrew the
trigger body and remove and clean
the filter inside the trigger assembly.
If not used for long periods or used
continuously for several days, add a
light smear of vaseline to the sealing
washers and moving parts to reduce
wear and assist free movement.
REPLACING THE PISTON CUP SEAL
In order to lubricate or replace the
piston cup seal with the spare item
supplied, the pump assembly can be
removed as follows:
1. Remove the split pin and release
the retaining clip from the
operating rod.
2. Withdraw the operating rod from
the top of the pump assembly.
Summary of Contents for 16LBP
Page 8: ......
