3
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
ASSEMBLY
The sprayer is supplied with an accessories pack containing the following
items. The numbers in brackets refer to the diagram/list on pages 6 & 7Any
deficiencies should be reported to your Clarke dealer..
1.
Push the lance into the trigger
assembly and secure with the
screw cap containing the collet
and O-ring.
2. Attach one of the nozzles to the
other end of the lance and
secure with the screw cap.
3. The shoulder straps can be
adjusted for length using the
buckles, so as to position the
sprayer comfortably on the operators back, ensuring they are not twisted.
OPERATION
1. Unscrew the container filler cap
and ensure the filter is in place.
2. Fill the container with the required
liquid up to the desired
graduation on the end and
replace the filler cap.
3. Pump the operating arm a few
times to pressurise the container
until the pump action stiffens.
2 x Connecting collets (46)
1 x Handle securing clip (17)
3 x Spray nozzles (Twin headed (53),
Conical (54) and Flat Fan (55)
1 x Complete set of O-rings
• 3 x to fit nozzles (53/54/55)
• 2 x to fit lance (47)
• 2 x to fit spray gun body (34)
• 1 x thin/1 x thick to fit trigger
valve piston (35/36)
1 x Piston cup seal (4)
Summary of Contents for 16LBP
Page 8: ......
