background image

EN

ENGLISH

Clarke

®

 

 

Operator’s Manual - Carpet Dryer

 

 

 

 

                                                 

FORM NO. 70664A

  -3- 

Grounding Instructions

120VAC GROUNDING INSTRUCTIONS

This appliance must be grounded. If it should electrically malfunction, grounding provides a path of least resistance for electric current to reduce the 
risk of electric shock. This appliance is equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged 
into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

 DANGER! 

Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a quali

fi

 ed 

electrician or service person if you are in doubt as to whether the outlet is properly grounded. Do not modify the plug 
provided with the appliance. If it will not 

fi

 t the outlet, have a proper outlet installed by a quali

fi

 ed electrician.

This appliance is for use on a nominal 120-volt circuit, and has a grounding plug that looks like the plug illustrated in Figure 1 below. A temporary 
adapter illustrated in Figures 2 and 3 may be used to connect this plug to a 2-pole receptacle as shown in Figure 2 if a properly grounded outlet is not 
available. The temporary adapter should be used only until a properly grounded outlet (Figure 1) can be installed by a quali

fi

 ed electrician. The green-

colored rigid ear, tab, or the like extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box cover. 
Whenever the adapter is used, it must be held in place by a metal screw.  

Grounding adapters are not approved for use in Canada.

Replace the plug if the grounding pin is damaged or broken.
The Green (or Green/Yellow) wire in the cord is the grounding wire.  When replacing a plug, this wire must be attached to the grounding pin only.
Extension cords connected to this machine should be 12 gauge, three-wire cords with three-prong plugs and outlets.  DO NOT use extension cords 
more than 50 feet (15 m) long.

PLEASE NOTE:  FOR NORTH AMERICA ONLY (NOT APPROVED FOR USE IN CANADA)

Operating Instructions

Deluxe Model:

Position machine. Plug into proper outlet (see Grounding Instructions.)  

1. 

Turn switch to speed desired ( 0 for off, 1 for low, 2 for medium, and 3 for high.)

2. 

Turn machine off (0) when 

fi

 nished drying.

3. 

Unplug machine.

4. 

Inspection and Repairs

Take the machine to the nearest authorized repair location once a year for the maintenance inspections.
To make any repairs, take the machine to the nearest authorized repair location.

Grounding Pin

Tab for Grounding Screw

Adapter

Adapter

Metal Screw

FIGURE 1

FIGURE 2

FIGURE 3

Grounded Outlet Box

Grounded Outlet

revised 4/13

https://harrissupplyind.com - To Order Parts Call 608-268-8080

Summary of Contents for 04131D













Reviews: