Page 18
Clarke
®
Operator's Manual FM-1500HD, 1700HD, 2000, & 2300
FORM NO. 70447A
ACCESSORIES
These different brushes and attachments are available for the
Model FM Floor Maintainer:
1. Brushes with natural or synthetic bristles for polishing.
2. Brushes with natural or synthetic bristles for scrubbing.
3. Brushes with steel wire bristles.
4. Synthetic pad holders.
5. Synthetic pads for polishing, scrubbing, stripping, etc.
6. Lambs wool polishing pads.
7. Brushes with metal or wood backs, and with holes to let
the solution go through.
8. Solution tank.
9. Attachments for spray buf
fi
ng.
10. Sanding, grinding, and carpet scrubbing accessories.
DANGER: Fine dust from a
fl
oor sanding opera-
tion can cause an explosion. Use a
fl
oor sanding machine only in an area
with good ventilation.
For more information, see your dealer or the nearest Clarke
branch.
MAINTENANCE OF THE MACHINE
WARNING: Maintenance must be done by autho-
rized personnel only.
Clean your machine frequently. It will have longer life and
need fewer repairs.
Lubrication
The Polisher is completely lubricated. The bearings and gears
in the gear unit have enough lubricant for two or three years
of normal operation. All other bearings are sealed and have
enough lubricant for the life of the machine.
Motor And Gears
Remove or blow dust and dirt from the motor frequently.
Repairs
If repairs to the gear unit or motor are needed, do not dis-
assemble the gears and motor! Return the machine to the
nearest Clarke Service Branch or Clarke Authorized Service
Center.
Maintenance Inspection
Return the machine to a Clarke Authorized Service location ev-
ery 12 months for maintenance inspections.
Lever To Lock The Handle
The locking mechanism for the handle can become loose.
Tighten the nut on the end of the cross link bolt. The pressure
of the locking lever is correct when the handle can be adjusted
easily and fastened as needed.
Maintenance Of Brushes
Always remove the brush from the machine when not in use.
Keep brushes in a cool, dry location. Heat can damage the
wood and the bristles. Scrub brushes with bassine
fi
bers must
be put in water for 16 hours to replace moisture and give the
bristles a longer life.
Summary of Contents for 01013A
Page 29: ......