Clark WSTX33, Operator'S Manual

Page: 57 / 80

5-13
Section 5. Operating Procedures
Fig. 1 Stop close to the stack
and level the forks.
Fig. 2 Lift (raise) the load high
enough to clear the top
surface of the stack.
Fig. 3 Slowly move the load
into position. Be careful
not to damage or move
adjacent loads.
Fig. 4 When the load is
aligned with the stack
beneath it, carefully
lower the load onto
the top surface of the
stack.
Fig. 5
Lower (drop) the forks
slightly to clear (disen-
gage) the load pallet.
Tilt the forks forward
slightly, if necessary.
Fig. 6 Check your travel path,
then carefully back
away until the forks are
clear of the stack. Stop
and lower the forks to
the travel position (6
to 8 inches above the
ground), then tilt back
to travel.
Fig. 5 Fig. 6
Fig. 1
Fig. 2
Fig. 3
Fig. 4