Clark GTS 20 D, Operator'S Manual, Page: 63 / 128

Starting from a Safe Condition 4-5
Section 4. Operating Procedures
Positioning Forks and Upright
When driving, with or without a load, it is
good practice to have the forks slightly
raised and tilt the upright (forks) backward.
Having the forks raised and tilting back
prevents the fork tips from catching on
possible obstructions and reduces the
wear on the fork blades from striking or
dragging on the floor or ground. See the
NOTICE and CAUTION below.
Pull back on the lift control lever and raise
the forks 6 to 8 inches (152 to 203 mm)
above the floor. Then, using the tilt
control, tilt the upright back slightly to
raise the fork tips.
NOTICE
When the upright (carriage and/or load) is raised, the sta-
bility of the truck is reduced. Some of the other conditions
that may affect stability are: ground and floor conditions,
grade, speed, loading, dynamic and static forces and the
judgement exercised by the operator. Trucks equipped
with attachments behave as partially loaded trucks even
when operated without a load on the attachment. Also,
improper operation, faulty maintenance or poor house-
keeping may contribute to a condition of instability.
CAUTION
!
For stability reasons, do not travel with the load or
carriage raised into a high (elevated) position. Travel with
the lift mechanism raised only enough to clear the ground
or obstacles.
WARNING
!
If your truck starts to tip over, DO NOT JUMP! Your
chances for survival in a tip-over are better if you stay
with the truck, in your seat. BRACE YOURSELF!. Make
sure your seat belt is fastened securely. Stay in your seat.
Grip the wheel. Brace your feet. See page 1.14
Lift Control
Lever
Tilt Control
Lever