Clark GTS 20 D, Operator'S Manual, Page: 50 / 128

3-12 Operator Controls
Engine Stop
Run the engine at idling speed briefly before shutting it off.
Turn the key switch to the "OFF" position to shut the engine down.
Seat Adjustment
The fore and aft adjustment lever is located
on the front under the seat. To unlock, pull
the lever to the left and adjust the seat,
release the lever. Be sure that the seat
locking mechanism is engaged. The back
declining adjustment lever is located on the
left side of seat cushion. Pull the lever up and
adjust the back, release the lever. Be sure
that the back locking mechanism is engaged.
CAUTION
!
Never adjust driver's seat while truck is moving, to avoid
the possibility of loss of control and of personal injury.
Parking Brake
Activates brake operation.
Check the parking Brake
The brake is applied by pulling the lever
uppers. It is released by pushing downs.
CAUTION
!
Always apply parking brake before leaving truck.
WARNING
!
Never operate your lift truck with a defective parking brake.
Hour Meter
Starting the engine also starts the operating hour meter. Use the hour
meter reading to perform prescribed maintenance.
Fore and
Aft Adjust
Back
declining
adjustment
Driver’s weight
adjustment
kg
1
7
0
16
0
15
0
140
130
12
0
11
0
1
0
0
90
80
70 60 50
lb
3
7
0
3
50
3
30
31
0 2
90 27
0
25
0
2
30
2
1
0
19
0
17
0 1
50 130 110
Parking Brake
Apply
Parking Brake
Release