5
E
N
G
L
I
S
H
Pairing
XLCgo
with
Clarity DECT
devices
XLCgo pairs with the following Clarity DECT devices as an expandable
speakerphone
: XLC8,
XLC7BT, XLC3.4+ and XLC4.
1.
Step one: Enter pairing mode on DECT base
•
Press and hold the [FIND] key on base for 5 seconds, until the visual ringer starts flashing
2.
Step two: Enter pairing mode on XLCgo
•
Turn on XLCgo. Place it in the charging cradle and press & hold [PAIR] key (around 5
seconds) until you hear "
Start pairing with base station
" and DECT indicator flashes
green and red alternately. Then XLCgo enters DECT pairing mode.
3.
Step three: Connection to the DECT device
•
XLCgo is connected with the device automatically as soon as they are paired. When
connected, you hear voice guidance “
Base station connected
”. If not, it announces
"registration
failed.
"
Reconnecting Your
XLCgo
1. If XLCgo has been turned off, it will reconnect to the phone automatically after turning it
on; if not, press reconnect on the phone.
2. If the phone has been powered off and XLCgo is then disconnected, reconnect it via the
phone’s menu when the phone is on again. Or, turn XLCgo off and then back on.
