Clarity SN-4215-P, User Manual

Page: 82 / 103

7 - 6
Auto Detect (Open Source Select, then press Source button again.)
[ ] Auto Enable
When checked (
x
), causes Mode Detect process to test the incoming signal
every second.
[ ] Message Enable
When checked (
x
), causes Mode Detect to display a message telling which
type of sync is currently being tested for.
← → ← → ← → ← →
Noise Tolerance 000
When Mode Detect is Auto Enabled, it compares the incoming signal to what it
holds in memory. When these two differ by a significant amount for more than
the number of seconds shown in Noise Tolerance, Mode Detect reloads the
memory with the new values. Range: 0 15 seconds
Frequency Select
*
000
Adjust the frequency of the internal dot clock, which should be made to match the
frequency of the computer source. Number shown does not directly correlate to
frequency. §
Phase Select
*
000
Adjust phase of the internal dot clock, which should be made to match the phase of
the computer source. Number shown does not directly correlate to phase. §
Input Level
Black Level
Opens
Black Level
menu
White Level
Opens
White Level
menu
Black Level *(Go to this menu by pressing
INPUT
once.)
(Requires Black field)
Auto [ ]
Automatically adjusts the display’s Black Level to the incoming video from the
PC or MAC. (Always use this option rather than adjusting this level manually.)
All
← →
← → ← →
← → Raises or lowers all three (RGB) levels together
Level Sample
Red 127 001
Green 126 000
Blue 131 000
Level show the current (internal) setting of R, G, and B. §
Sample shows the levers (in bits) detected in the incoming signal; 000 is black,
255 is maximum white.
White Level *(Go to this menu by pressing
INPUT
once.)
(Requires White field)
Auto [ ]
Automatically adjusts the display’s Black Level to the incoming video from the
PC or MAC. (Always use this option rather than adjusting this level manually.)
All
← →
← → ← →
← → Raises or lowers all three (RGB) levels together
Level Sample
Red 127 254
Green 126 255
Blue 131 255
Level show the current (internal) setting of R, G, and B. §
Sample shows the levers (in bits) detected in the incoming signal; 000 is black,
255 is maximum white.