manualshive.com logo in svg

Clarity RetCam Shuttle, User Manual, Page: 126 / 177

Share
Download
Clarity RetCam Shuttle User Manual Download Page 126

User Preferences

            

125

RetCam 3 and RetCam Shuttle User Manual

PN 18-000393 Rev. A

9

User Preferences

The chapter describes the About RetCam Software and User Preferences functions of the 
Utilities menu. The activities covered include:

•

About RetCam Software on page 125

•

Device Identification on page 127

•

Domain Configuration on page 128

•

Configuring Live Imaging on page 129

•

Configuring New Exam Defaults on page 130

•

Configuring Notification Options on page 131

•

Configuring Printers on page 131

•

Enabling Synchronization on page 132

•

Configuring Windows® Preferences on page 132

Select the Utilities menu 

, located in the lower right hand corner of the task bar (see 

Figure 15 on page 46

 or 

Figure 121 on page 125

). It provides access to information about 

RetCam software and user preferences, as well as other system related information.

Figure 121

Accessing User Preferences

About RetCam Software

Click 

About...

 to identify the RetCam software version. This pop-up contains quite a bit of 

information related to the configuration and versioning of the RetCam system software 
and hardware.

Click  

to 

exit.

The 

Trace Window

, 

User

 

Preferences

, and 

Unlock Maintenance Mode

 options enable 

access to system functions related to the set-up, maintenance, and troubleshooting of the 
RetCam System.

Summary of Contents for RetCam Shuttle


















































































































































































Reviews:

No comments