Before setting the time, check if the stopwatch second and minute hands are in
the “60” (12 o’clock) position. If either of the stopwatch hands are not in the “60”
position, reset them following the procedure below:
1. Pull out the crown.
2. Press button A or B to reset the stopwatch second and minute hands to “60” position.
By pressing button A the hands move counter clockwise. By pressing button B the
hands move counter clockwise.
3. Push the crown back into the normal position.
SETTING THE TIME
1. Pull out the crown when the second hand is at the 12 o’clock position. The second
hand will stop on the spot. Do not press any buttons, otherwise the chronograph
hands will move.
2. Turn the crown to set hour, minute and the 24-hour hands to the desired time.
As the hour hand moves, the 24-hour hand moves correspondingly. When setting
the hour hand, check if the 24-hour hand is set properly.
3. Push the crown back in to the normal position to re-engage time keeping.
NOTE: Never pull the Crown when the watch is wet.
