Clarity BT914 User Manual Download Page 60

Page: 60 / 66

Common cure for electronic equipment.
• If the telephone is not responding normally, put the cord-

less handset in the telephone base. If this does not fix the
problem, do the following (in the order listed):

Disconnect the power to the telephone base.

Disconnect the batteries on the cordless handset.

Wait a few minutes before connecting power to the
telephone base.

Install the batteries again and place the cordless hand-
set in the telephone base.

Wait for the cordless handset to synchronize with the
telephone base. Allow at least one minute for this to
take place.

ECO mode

• This power conserving technology reduces power con-

sumption for optimal battery performance.

• The ECO mode activates automatically whenever the hand-

set is synchronized with the telephone base.

• The handset shows ECO when the ECO mode activates.

Energy-saving charging mode
When this mode is activated, all telephone functions, except
the handset batteries charging, will be disabled.

FREQUENTLY ASKED QUESTIONS

Summary of Contents for BT914



































































Search results

Summary of Contents for BT914

Reviews:

Brands by name

Popular brands

Clarity BT914, User Manual

Search results

Summary of Contents for BT914

Reviews:

Brands by name

Popular brands