34 VX215A
English
Owner’s Manual
17. ERROR DISPLAY
Display
Cause
Measure
DISC ERROR
A disc is caught inside the DVD
deck and is not ejected.
This is a failure of DVD deck’s
mechanism and consult your
store of purchase.
A disc cannot be played due to
scratches, etc.
Replace with a non-scratched,
non-warped disc.
A disc is loaded upside- down
inside the DVD deck and does
not play.
Eject the disc then reload it
properly.
LOAD ERROR
The connected USB device is not
supported.
If the USB device is frozen,
disconnect it, and reconnect it
again.
Connect a proper USB device.
An error occurred when
controlling the USB device.
Disconnect the USB device, and
reconnect it again.
The device is connected via the
USB Hub.
Disconnect the device, and
reconnect directly to the USB
connector of this unit without
using the USB Hub.
OVERCURRENT
Over-current is detected.
Turn off the ignition switch,
disconnect the device, restart the
engine and reconnect it again. If
the device is still not recognized,
try replacing with a different
device.
Hex_VX215A_OM.indd 34
6/30/15 2:04 PM
