Clarion VRX928RVD, Service Manual

Page: 27 / 44

- 27 - VRX928RVD
IC101 051-5705-00 TA1254AF
IC102 051-3014-90 NJM2115M
IC201 051-6058-08 BA6859AFP
IC202 051-6041-08 BA5937FP
IC301 051-6351-00 TC9453F
IC302 051-9315-00 MSM514265C-50TS
IC401 051-9315-00 MSM514265C-50TS
IC402 051-6352-00 TC9469BF
IC501 052-5041-51 TMP95CW64F-
3UR6(Z)
IC503 051-1738-08 TC7S08F
IC504 051-5419-12 MN1382Q
J101 074-1059-80 30P
J201 074-1201-68 18P
J501 074-1201-68 18P
J504 074-1189-00 50P
L101 010-3050-93 10uH
L102 010-3050-93 10uH
L501 010-2275-52 3.3uH
L502 010-2275-52 3.3uH
Q101 131-1188-50 2SB1188P,Q,R
Q102 131-1188-50 2SB1188P,Q,R
R101 119-1001-15 1/16W 10 ohm
R102 119-1001-15 1/16W 10 ohm
R103 119-1021-15 1/16W 1k ohm
R104 119-1021-15 1/16W 1k ohm
R105 119-5601-15 1/16W 56 ohm
R106 119-5601-15 1/16W 56 ohm
R107 119-3331-15 1/16W 33k ohm
R108 119-3331-15 1/16W 33k ohm
R109 119-2731-15 1/16W 27k ohm
R110 119-1041-15 1/16W 100k ohm
R112 119-1041-15 1/16W 100k ohm
R113 119-1031-15 1/16W 10k ohm
R201 119-1021-15 1/16W 1k ohm
R202 119-1021-15 1/16W 1k ohm
R203 119-8201-15 1/16W 82 ohm
R204 119-8201-15 1/16W 82 ohm
R205 119-1031-15 1/16W 10k ohm
R206 119-1031-15 1/16W 10k ohm
R208 032-0104-70 1/4W 1 ohm
R209 032-0104-70 1/4W 1 ohm
R210 119-2221-15 1/16W 2.2k ohm
R211 119-3321-15 1/16W 3.3k ohm
R303 119-4731-15 1/16W 47k ohm
R304 119-1031-15 1/16W 10k ohm
R305 119-1031-15 1/16W 10k ohm
R307 119-1031-15 1/16W 10k ohm
R308 119-1031-15 1/16W 10k ohm
R309 119-4731-15 1/16W 47k ohm
R310 119-5621-15 1/16W 5.6k ohm
R311 119-1031-15 1/16W 10k ohm
R312 119-1031-15 1/16W 10k ohm
R313 119-1031-15 1/16W 10k ohm
R314 119-1031-15 1/16W 10k ohm
R315 119-1031-15 1/16W 10k ohm
R316 119-1031-15 1/16W 10k ohm
R317 119-1041-15 1/16W 100k ohm
R318 119-2211-15 1/16W 220 ohm
R319 119-5621-15 1/16W 5.6k ohm
R320 119-0000-05 1/16W 0 ohm
R321 119-5631-15 1/16W 56k ohm
R322 119-1021-15 1/16W 1k ohm
R323 119-2731-15 1/16W 27k ohm
R324 119-1021-15 1/16W 1k ohm
R325 119-5631-15 1/16W 56k ohm
R326 119-1021-15 1/16W 1k ohm
R327 119-2731-15 1/16W 27k ohm
R328 119-1021-15 1/16W 1k ohm
R329 119-2211-15 1/16W 220 ohm
R331 119-2211-15 1/16W 220 ohm
R332 119-1541-15 1/16W 150k ohm
R333 119-1541-15 1/16W 150k ohm
R335 119-1031-15 1/16W 10k ohm
R336 119-1031-15 1/16W 10k ohm
R337 119-1051-15 1/16W 1M ohm
R338 119-3311-15 1/16W 330 ohm
R339 119-1031-15 1/16W 10k ohm
R340 119-1031-15 1/16W 10k ohm
R341 119-4741-15 1/16W 470k ohm
R342 119-4721-15 1/16W 4.7k ohm
R343 119-1031-15 1/16W 10k ohm
R344 119-5631-15 1/16W 56k ohm
R345 119-1531-15 1/16W 15k ohm
R346 119-4731-15 1/16W 47k ohm
R347 119-3321-15 1/16W 3.3k ohm
R403 119-1031-15 1/16W 10k ohm
R404 119-4731-15 1/16W 47k ohm
R405 119-0000-05 1/16W 0 ohm
R501 119-3331-15 1/16W 33k ohm
R504 119-1041-15 1/16W 100k ohm
R505 119-4731-15 1/16W 47k ohm
R506 119-4731-15 1/16W 47k ohm
R507 119-2231-15 1/16W 22k ohm
R508 119-2231-15 1/16W 22k ohm
R509 119-1041-15 1/16W 100k ohm
R512 119-4721-15 1/16W 4.7k ohm
R513 119-4721-15 1/16W 4.7k ohm
R514 119-4731-15 1/16W 47k ohm
R515 119-1041-15 1/16W 100k ohm
R516 119-1031-15 1/16W 10k ohm
R517 119-1031-15 1/16W 10k ohm
R518 119-1031-15 1/16W 10k ohm
R519 119-1031-15 1/16W 10k ohm
R520 119-1031-15 1/16W 10k ohm
R521 119-1031-15 1/16W 10k ohm
R538 119-2201-15 1/16W 22 ohm
R539 119-8201-15 1/16W 82 ohm
R540 119-8201-15 1/16W 82 ohm
R541 119-8201-15 1/16W 82 ohm
R542 119-2201-15 1/16W 22 ohm
R543 119-8201-15 1/16W 82 ohm
R548 119-1041-15 1/16W 100k ohm
R549 119-1021-15 1/16W 1k ohm
R550 119-1041-15 1/16W 100k ohm
S201 013-7412-50 SPVG210100
X301 060-1524-90 22.57MHz
X401 060-1526-90 50.0MHz
X501 060-1525-90 25.0MHz
REF No. PART No. DESCRIPTION REF No. PART No. DESCRIPTION REF No. PART No. DESCRIPTION
ATTENTION ABOUT THE SLIDE MECHANISM
In case that the LCD or the slide mechanism is replaced,the
position information of OPE/TILT/CLOSE must be re-
memorised in the EEP ROM on the Main PWB.
How to re-memorise
1. Prepare a plate (31.5mm) as follows and fix it on the pro-
jections of the LCD panel.
2. Push "TA" key for more than 2 seconds pressing "MUTE"
key.
3. Release it after beep sounds.
4. To memorise the positions,OPEN/TILT-UP/TILT-DOWN/
CLOSE operations will be done automatically.
* The above procedure must be started from the "CLOSE"
position.
If the position is not complete "CLOSE",change the posi-
tion by the following procedure.
How to change the "CLOSE" position
A
B
The flexible PWB must be removed.
Move the position by adding 6 to 8volts to the motor. Manual
adjustment may cause a damage of the gears.The flexible
PWB must be removed from the Main PWB.
1. To open the mechanism,connect (A) to (-) and (B) to (+)
on the PWB of the slide mechanism.
2. To close the mechanism,connect (A) to (+) and (B) to (-).
MUTE TA
31.5mm