background image

VRX815

47

English

Installation and Wire

connection manual

VRX815

Installation and Wire connection manual

 Contents

1. BEFORE STARTING ............................................................... 47
2. PACKAGE CONTENTS ........................................................... 47
3. GENERAL CAUTIONS ............................................................ 48
4. CAUTIONS ON INSTALLATION .............................................. 48
5. INSTALLING THE MAIN UNIT ................................................. 49
6. REMOVING THE MAIN UNIT .................................................. 51
7. CAUTIONS ON WIRING .......................................................... 51
8. WIRE CONNECTION .............................................................. 52
9. SAMPLE SYSTEMS ................................................................ 55

 

1.

BEFORE STARTING

 

2.

PACKAGE CONTENTS

1. This set is exclusively for use in cars with a

negative ground 12 V power supply.

2. Read these instructions carefully.

3. Be sure to disconnect the battery “

v

” terminal

before starting. This is to prevent short circuits
during installation. (Figure 1)

Car battery

Figure 1

1

Main unit

2

Tuner Amp unit

3

Manuals

Owner’s manual & Installation manual

Warranty card

4

Power supply lead (For the tuner amp unit)

5

Connection cord (Main unit 

 Tuner  amp

unit)

6

Antenna extension cord

7

Bag for accessories of the main unit (No. 1)

Flat head screw (M5 

×

 8) ............................ 4

Sems hexagonal bolt (M5

×

 8) ..................... 5

Electro tap

Machine screw (M4

×

 3) ............................... 4

8

Bag for accessories of the main unit (No. 2)

Hook plate ................................................... 2

Cord clamp

Spacer

Special screw

9

Bag for accessories of tuner amp unit

Maunting bracket ......................................... 2

Canoe clip ................................................... 4

Machine screw (M4 

×

 8) .............................. 4

0

Universal mounting bracket

!

Remote control unit

@

Battery

(for remote control unit)

#

Outer Escutcheon

$

DCP Case

Summary of Contents for VRX815













Reviews: