Clarion VRX756VD, Owner'S Manual & Installation Manual

Page: 58 / 73

English
Owner
’s
manual
60
VRX756VD
280-8207-00
5.1 ch Surround Decoder Operations
Setting and storing P.EQ Properties
1. Press the [ ADJ ] button and touch the
[ AUDIO ] key.
2. Touch the [ P.EQ ] key to show the P.EQ
adjusting display.
3. Touch the key for the desirable type to select it.
The P.EQ adjustment contents are as
follows:
●
SIGNAL
∗
The factory default setting is “ P.NOISE ”.
This function selects “ P. NOISE ” or “ MUSIC ”.
●
SPEAKER SELECT
∗
The factory default setting is “ FRONT ”.
This function selects “ FRONT ”, “ CENTER ” or
“ SURROUND ”.
●
BAND
∗
The factory default setting is “ BAND1 ”.
Select the channel to be compensated
(“
BAND1 ”, “ BAND2 ”, “ BAND3 ”).
●
FREQUENCY
∗
The factory default setting is “ 1 kHz ”.
Select the center frequency that you want to
compensate from the range of 18 Hz to 20
kHz. (1/3 octave step, 31 points)
●
Q
∗
The factory default setting is “ 1 ”.
Set the sharpness of the Q-curve to one of
the parameters: 1, 3, 5, 7 and 20.
●
GAIN
∗
The factory default setting is “ 0 ”.
Adjust the gain (output level) in the range of
–6 dB to +6 dB. (1 dB step, 13 points)
4. Touch the [ RTN ] key, [ ESC ] key, or press the
[ ADJ ] button.
Selecting the Dolby PL
II
(Dolby Pro
Logic
II
) type
∗
The factory default setting is “ OFF ”.
1. Press the [ ADJ ] button and touch the
[ AUDIO ] key.
Touch the [ Dolby PL II ] key.
2. Touch the key for the desirable type to select
it.
3. When the setting is finished, touch the [ ESC ]
key or press the [ ADJ ] button to return to the
previous mode.
Output adjustment of subwoofer volume,
center volume and balance/fader
1. Press the [ ADJ ] button and touch the
[ AUDIO ] key.
Touch the [ DETAIL ] key.
2. To make an adjustment on :
●
Subwoofer volume adjustment
2-1. Touch the [ SUBWOOFER VOL ] key to
adjust to desirable level.
∗
The factory default setting is “ 0 ”. (Setting
range : –6 to 3)
●
Center volume adjustment
2-1. Touch the [ CENTER VOL ] key to adjust to
desirable level.
∗
The factory default is “ 0 ”. (Setting range : –6
to 0)
●
Balance/Fader adjustment
2-1. Touch the [ BAL/FAD ] key.
Touch the [
w
] or [
z
] key to adjust the
balance level.
[
w
] key : emphasized the sound from the
front speakers.
[
z
] key : emphasized the sound from the
rear speakers.
2-2. Touch the [
Å
] or [
Î
] key to adjust the fader
level.
[
Å
] key : emphasized the sound from the
left speakers.
[
Î
] key : emphasized the sound from the
right speakers.
3. Touch the [ RTN ] key, [ ESC ] key, or press the
[ ADJ ] button.
+VRX756VD-050-Eng3 05.1.18, 1:03 PM 60