VRX746VD
47
English
Owner
’s
manual
TV Operations
TV functions
When an optional TV tuner is connected through
the CeNET cable, this unit controls all TV tuner
functions. To watch TV requires a TV tuner.
WARNING
For your safety, the driver should not
watch the TV or operate the controls
while driving. Please note that watching
and operating the TV while driving are
prohibited by law in some countries.
Watching TV
Note:
• For your safety, the VRX746VD has a safety
function which turns off the picture when the car
is moving, so only the audio can be heard. The
picture can only be watched when the car is
stopped and the parking break is applied.
1. Press the [
FUNC
] button and select the TV
mode.
2. Press the [
BAND
] button to select the
desired TV band (TV1 or TV2). Each time
the button is pressed, the input selection
toggles between TV1 and TV2.
3. Press the [
d
] or [
a
] button to tune in the
desired TV station.
∗
When the panel is open, the same operation
is also available by using the [
å
] or [
∂
]
key.
Watching a video
The TV tuner has a VTR input terminal to which
1 external device can be connected. Connect a
12V video cassette player (VCP) or video
cassette recorder (VCR) to the TV tuner input
terminal.
1. Touch the screen to display the menu, then
touch the [
SUB
] key.
2. Touch the [
EXTRA SELECT
] key in the
menu screen when the “
VTR
” is displayed.
3. To return to the TV broadcast, touch the
screen again and touch the [
EXTRA
SELECT
] key in the menu screen.
DVD Changer Operations
Only basic operations of DVD changer can be
performed from the unit. Use the remote control
unit to perform the following functions.
• SCAN, REPEAT, RANDOM function
• V-CD PBC function ON/OFF
• DVD SETUP function, AUDIO, SUBTITLE,
ANGLE setting function
For details on operations other than those
described below, see DVD player Operation.
For details on DVD changer precautions, refer
to the supplied owner’s manual.
Note:
• When the DVD changer (VCZ625) is connected
via optical cable, no sound will be output if AUDIO
OUT is switched to ANALOG on the changer’s
“GENERAL SETUP” menu.
Selecting a disc
When the panel is closed :
Each of the [
DIRECT
] button corresponds to a
disc loaded into the DVD changer.
Press the [
DIRECT
] button (1 to 6) and select
the desired disc.
When the panel is open :
Touch the [
LIST
] key, otherwise press the [
DISC
SEL
] button on the remote control unit.
Touch the [
DIRECT
] key (1 to 6) in the display
or press the numeric button for the disc number
(1 to 6) on the remote control unit to select the
desired disc.
Switching to a next disc
(Disc Up function)
The disc up function plays from the first track
(track No.1) of the next disc.
Press the [
BAND
] button.
Each time you press the [
BAND
] button, the
disc changes to the next disc.
∗
When the remote control unit supplied with the
DVD changer (VCZ625) is used to operate this
component, some operation buttons are not
supported.
