14
VMA643
English
Installation and W
ire
connetion Manual
After adjusting the angle, firmly tighten the
screws to fasten the display unit in place.
Note:
• Vibration sometimes causes the monitor
stand screws to become loose. Periodically
inspect and re-tighten any loose screws.
Installing the Monitor Stand/Display
Unit
After adjustment,
tighten and fasten.
INSTALLING THE
CONTROL BOX
1. Attaching the Velcro tape
Attach Velcro tape A to the control box side,
and Velcro tape B to the car side.
Note:
• Align the positions of the Velcro tape so that
Velcro tape A is placed over Velcro tape B.
2. Attaching the Control Box
Align Velcro tape A and Velcro tape B, and
fasten the control box in place.
Control Box
Velcro
tape A
Velcro
tape B
