VDH9600
VIDEOCASSETTE PLAYER/RECORDER
8
3. Slide the battery holder back into the remote until it locks
with a “click”.
Inserting Battery Into The IR Remote Control
1. Locate the battery compartment on the back of the IR
Remote Control.
2. Remove the battery holder and insert one CR2025 battery
(supplied), matching polarity as shown on the battery hold-
er (positive side up).
D
ESCRIPTION OF
R
EMOTE
C
ONTROL
Figure 3. Battery Installation of VDH9600’s Remote Control.
Figure 4. VDH9600 Remote Eye.
Description of Remote Eye
The VDH9600 is supplied with a Remote Eye sensor which
allows you to access all the features on the credit card sized
Remote Control when the VDH9600 is mounted in another
location away from the front panel sensor opening.
Simply plug the sensor cable into the rear of the VDH9600.
Run the sensor and cable to the front of the vehicle and
mount the sensor in a convient location.
NOTE:
The IR sensor mounted in some Clarion monitors, such as
the VMA6491, can be connected directly to the remote sensor
input to function as the remote eye for the system. (See page 15)
Summary of Contents for VDH9600
Page 1: ...VDH9600...
