25
© 2 0 0 5 d i r e c t e d e l e c t r o n i c s , i n c .
➤
The zone icons will turn on and remain on until a transceiver
button is pressed, clearing the page alert.
➤
The transceiver will enter page recognition mode and
generate alarm page alerts.
multi-level security arming
Multi-Level Security Arming allows you to select which of the
system's inputs or sensors will be active and which will be
bypassed when the system is armed. (See
Table of Zones section
of this guide.) Pressing
(only in Standard Configuration)
again within five seconds of arming the system will activate the
Multi-Level Security feature. Each time
is pressed again, a
different security level is selected. The different security levels are
selected as follows:
➤
Press
once: The siren chirps once. The system is armed.
➤
Press
a second time within five seconds: The siren chirps
twice followed by a long chirp. Zone 2 is now bypassed.
➤
Press
a third time within five seconds: The siren chirps
three times followed by a long chirp. Zone 4 is now bypassed.
➤
Press
a fourth time within five seconds: The siren chirps
four times followed by a long chirp. Zones 2 and 4 are now
bypassed.
➜
note:
Icons 13, 14, 16, and 20 represent alarm system
triggered sequence zone inputs. For more information
about icons and the zones they represent refer to the
Standard Remote Configurations section.
