19
© 2 0 0 5 d i r e c t e d e l e c t r o n i c s , i n c .
Command Page
When a command (arm/disarm, remote start, or auxiliary
channel) from the transceiver is sent and received, the system will
send a command page back to confirm receipt.
Page Recognition Mode
The transceiver will leave a zone icon illuminated when it has
received a triggered response and will wait for violation recogni-
tion. Press any button on the transceiver, the LCD information
and alarm page alerts will be cleared.
u
ussiin
ng
g yyo
ou
urr ssyysstte
em
m
warning! safety first
The following safety warnings must be observed at all times:
➤
Due to the complexity of this system, installation of this
product must only be performed by an authorized Ungo
dealer.
➤
When properly installed, this system can start the vehicle via
a command signal from the remote control. Therefore, never
operate the system in an enclosed area or partially enclosed
area without ventilation (such as a garage). When parking in
an enclosed or partially enclosed area or when having the
vehicle serviced, the remote start system must be disabled
➜
note:
The transceiver buttons will not send a command
to the system until the alarm page is cleared.
