manualshive.com logo in svg

Clarion Ungo Pro Security SR1000, Owner'S Manual

Share
Download
Clarion Ungo Pro Security SR1000 Owner'S Manual Download Page 9

6

standard configuration

Button

The arming and panic functions are controlled by pressing this button

for one second.

Button

The disarming function is controlled by pressing this button for one second.

Button

Silent arm/disarm and an optional auxiliary function are controlled by

this button. (Silent arm/disarm works by pressing this button for less

than one second before arming or disarming. An optional auxiliary

function, such as trunk release, can be controlled by pressing this but-

ton for 1.5 seconds.)

The auxiliary output controls 

__________________________.

Button

The remote engine start function of your system is controlled by press-

ing this button twice within 3 seconds.

and 

Buttons

An optional auxiliary convenience or expansion function that you have added

to your system can be activated by pressing these buttons simultaneously.

The auxiliary output controls 

__________________________.

Summary of Contents for Ungo Pro Security SR1000









































Reviews:

No comments

Brands by name

Popular brands

Load more brands