
16
4.
Press again.
The status LED will light solidly if you are entering override mode, and
it will go out if you are exiting override mode.
remote engine start
This feature allows you to remotely start and run your vehicle for a pro-
grammable period of time. This makes it possible to warm up the
engine, as well as adjust the interior temperature of the vehicle with the
climate control system. If interior heating or cooling is desired, the cli-
mate controls must be preset, and the fan blower must be set to the
desired level prior to remote starting the vehicle.
To remote start the vehicle:
1.
Press
on the remote twice within 3 seconds.
2.
The parking lights will flash to confirm that the vehicle will
attempt to start.
3.
In gasoline vehicles, the engine will start 4 seconds after the
parking lights flash. In diesel vehicles, the engine will start
when the WAIT-TO-START indicator on the vehicle's dash
goes out.
4.
Once the vehicle has started, it will run for the pre-program-
med period of time (either 12, 24, or 60 minutes - see
Programming Options section of this guide) or until a shut-
down input is triggered.
iim
mp
poorrtta
anntt!! (1) Never remote start your vehicle when the keys
are in the ignition, except when performing override take-
over, and (2) Never start the vehicle if it is not in either PARK
or NEUTRAL.