23
QUICK REFERENCE GUIDE:
To lock using your remote
■
To lock the system press
for one second. The doors will lock (if con-
nected). The LED will begin to flash. The Starter Kill will prevent the
vehicle’s starter from cranking if it has been installed. The vehicle’s horn
(if connected) will honk and the parking lights will flash once to con-
firm activation of the system.
To unlock using your remote
■
To unlock the system press
for one second. The doors will unlock (if
connected). The Starter Kill will be deactivated and the vehicle’s horn
(if connected) will honk twice and the parking lights will flash twice.
Disabling the Starter Kill without a remote
■
Turn on the ignition. Press and release the Override switch within 10
seconds. The LED will stop flashing and the vehicle should start. Be sure
to check with the installer for the location of the Override switch.
To remote engine start the vehicle
■
Press
twice within 3 seconds. The parking lights will turn on (if con-
nected) and the vehicle will start and run for the programmed amount
of time.
To enter or exit override mode
■
Turn the ignition to the "ON" position. Turn the ignition back off. Press
and release the Override switch within 10 seconds. The status LED will
light continuously if you have entered override mode. To exit override
mode, repeat the steps above. The LED will turn off when exiting override
mode.
To activate panic mode
■
Press and hold
for 1.5 seconds.
To disable the remote engine start system
■
To disable the remote engine start, move the shutdown toggle switch to
the OFF position.
Location of Shutdown Switch______________________________
Cut along dotted line and f
old f
or a quick and eas
y r
efer
ence to k
eep in y
our pur
se or w
allet.
✂
✂
Summary of Contents for Ungo Pro Security RK1
Page 1: ...Model RK1 O Ow wn ne er r s s G Gu uiid de e ...
Page 24: ...21 notes ...
Page 25: ...22 ...
