9
unlocking
Pressing
for one second unlocks the doors (if connected). The horn
will honk twice (if connected) and the parking lights will flash twice to
confirm unlocking of the system. The optional Starter Kill will be deac-
tivated. The status LED will turn off, unless the system is programmed
for Passive Mode. In Passive Mode, the status LED will flash rapidly
when the system is disabled. This indicates that the system will re-
engage the starter kill and re-lock the doors (if Passive Locking has been
programmed) in 30 seconds unless the ignition is turned on.
disabling the starter kill without a remote
If your remote is lost or damaged, you can manually override the starter
kill. To do this, you must have the vehicle's ignition key and know where
the Override switch is located. Be sure to check with the installer for the
location of the Override switch.
To override the starter kill, turn
the ignition on and press the
Override switch within 10 sec-
onds. The status LED will stop
flashing and the vehicle should start. If it does not start, you may have
waited too long; turn the ignition off and repeat the process.
LOCATION OF OVERRIDE SWITCH
____________________________
DRW-35
Summary of Contents for Ungo Pro Security RK1
Page 1: ...Model RK1 O Ow wn ne er r s s G Gu uiid de e ...
Page 24: ...21 notes ...
Page 25: ...22 ...
