6
using your system
locking/arming
Pressing
for one second arms the system by activating the starter
kill and locking the doors (if connected). The horn will honk (if con-
nected) and the parking lights will flash once to confirm arming of the
system. While the system is armed, the status LED will flash once per
second. The Starter Kill (if installed) will also prevent the vehicle’s starter
from cranking.
The system can also be programmed to arm the optional Starter Kill
automatically (called Passive Mode). If the system has been pro-
grammed for Passive Mode, the Starter Kill will automatically activate
30 seconds after the ignition has been turned off. After the ignition has
been turned off, the status LED will flash rapidly to indicate that the sys-
tem is in Passive Mode.
If Passive Mode has been programmed on, then it is also possible to pro-
gram the system for Passive Locking. With Passive Locking, the vehicle
doors lock automatically at the same time that the Starter Kill is acti-
vated. If Passive Locking is programmed on, care must be taken to pre-
vent the keys from being locked in the vehicle.
nnoottee:: For Passive Mode to be effective, the Starter Kill relay
must be installed.
nnoottee:: Manually locking the vehicle does not arm the system;
it will only lock the doors.
Summary of Contents for Ungo Pro Security K10
Page 1: ...Model K10 O Ow wn ne er r s s G Gu uiid de e...
Page 17: ...14...
