background image

13

Domelight Supervision:

The domelight will illuminate for 30 seconds

each time the system is disarmed using the remote. This is useful for

seeing inside the vehicle at night prior to entering it.

Power Door Lock Control:

Your system is capable of controlling many

types of power door lock systems; however, some door lock systems

may require extra parts. Consult with your dealer to determine which

type of locks your vehicle uses. If power locks are connected, the sys-

tem can be programmed to lock the doors automatically 30 seconds

after the ignition has been turned off. The system can also be pro-

grammed to lock the doors when the ignition is turned on and to

unlock them when the ignition is turned off.

Power Trunk Release:

The system’s auxiliary output can be pro-

grammed to operate a factory power release for the vehicle's trunk or

hatch. If the factory release is not power-activated, An optional trunk-

release solenoid can often be added.

Power Window Control:

Power window control can be provided by

one of two systems. The first system provides control that will roll up

two windows automatically when the system is armed, or roll two win-

dows down by using the remote. The second system will roll two win-

dows both up and down. This second system also provides one touch

switch operation.

Progressive Door Unlocking:

For added security, your system can be

configured to unlock the driver’s door only, leaving the passenger doors

locked. Pressing the unlock button an additional time will unlock the

passenger doors. This option requires additional parts and labor.

Summary of Contents for Ungo Pro Security K10




















Reviews: