8
• The siren will sound.
• The parking lights will flash.*
• The doors will unlock.*
• The starter disable will turn Off.*
*
Optional feature
4.11 Coded Emergency Override (Programmable feature)
If the remote transmitter becomes lost or fails to operate, use the emergency override
feature to disarm the alarm system. Be sure that you have your ignition keys ready and
that you know the location of the Override switch before you perform this procedure.
To override the system:
1. Enter the vehicle.
• Because the alarm system is armed, the siren will sound.
2. Turn the ignition On.
3. Press the Override switch a number of times equal to the disarm code and continue
holding for 10 seconds on the last press. (If the default code setting has not been
changed, press and hold the override switch for 10 seconds to disarm to system.)
• The system will disarm.
• The siren will stop sounding.
• Starter disable will turn Off.
4. You can now start and drive the car.
5. If the disarm code is not entered correctly, turn off the ignition and begin again at
step 2.
6. Consult your authorized Ungo dealer to check the alarm system.
The default setting for the Emergency Override Disarm Code is 1. To change the
Emergency Override Code see
User Selectable Programming Options,
step 6.
Note: During installation, your installer can program the system to give a 15 second
entry delay when the system Arms passively. When the door is opened after the system
is Armed, the siren will give a series warning of chirps before sounding, giving you time
to perform the emergency override procedure.
4.12 Valet Mode
When placed into Valet Mode the security system will be disabled. However, the
optional keyless entry and auxiliary outputs will still function if installed.
To enter the Valet Mode:
1. Be sure the alarm system is disarmed.
2. Press and hold the Valet/Override button.
3. Turn the ignition On.
MS2105 owner.qxd 8/25/2003 4:21 PM Page 8
Summary of Contents for UNGO MS2105
Page 1: ......
