- 22 -
QX-3870N-A
*
Handle according to the product hand manual.
1
The CF PWB screws should not be raised.
A
1
Affixing position
* Reuse of the copper tape is prohibited.
2
(Fig. 2)
(Fig. 1)
Assembly 9
QX-3870N-A
(NAU-3225KCA-C)
㪈㪇
Work procedures
Work processing drawing
[Product hand manual]
Part No.
Important control items
Qty
MUZ2441
No.
There should be no raised screws or missing parts.
(Refer to Fig. 2.)
Left/Right directions : Attach so that the
ڏ
and
ڎ
parts are almost equal.
Do not oblique excessively.
Check that the half pierces are in the holes and
attach copper foil tape. (Refer to Fig. 1.)
After checking the screws on the front surface of the main unit
assy, attach copper foil tape (A) to the front surface.
Upper/Lower directions : Attach it aligned to the
bent portions of the front cover.
OK
NG
Half pierce
There should be no raising of the screw.
A
䃨
䃩
NG
* Do not hold the mechanism frame.
OK
Summary of Contents for QX-3870N-A
