DRX7575z
11
∗
When you have entered a title in a CD, it ap-
pears in the sub display.
If you have not en-
tered a title, “NO-TTL” appears in the title dis-
play instead. For information on how to enter a
title, refer to the subsection “Entering titles”
in the “Other Handy Functions”.
Setting the Z-enhancer
This unit comes with 3 types of sound tone effects
stored in memory. Select the one you prefer.
∗
The factory default setting is “Z-EHCR OFF”.
Each time you press Z-EHCR button
8
, the tone
effect changes in the following order:
“Z-ENHANCER 1”
➜
“Z-ENHANCER 2”
➜
“Z-
ENHANCER 3”
➜
“Z-EHCR OFF”
➜
“Z-
ENHANCER 1”...
• Z-ENHANCER 1: bass emphasized
• Z-ENHANCER 2: treble emphasized
• Z-ENHANCER 3: bass and treble emphasized
• Z-EHCR OFF
: no sound effect
Adjusting the tone
Press A-M button
$
and select the item to adjust.
Each time you press A-M button
$
, the item
changes in the following order:
●
When the Z-enhancer and tone bypass are off
“T-BYPASS”
➜
“BASS”
➜
“TREBLE”
➜
“BALANCE”
➜
“FADER”
➜
Function mode...
●
When Z-enhancer 1, 2 or 3 is set
“Z-EHCR”
➜
“BALANCE”
➜
“FADER”
➜
Function mode...
Setting tone bypass
The tone bypass disables the tone (bass and
treble) functions and cuts the noise generated
when the tone functions are on.
1. Press A-M button
$
and select “T-BYPASS”.
2. Turning the Rotary knob
&
clockwise sets the
tone bypass to “YES” (ON); turning it
counterclockwise sets the tone bypass to
“NO” (OFF).
∗
The factory default setting is “NO” (OFF).
∗
If the setting is “YES” (ON), the bass and treble
adjustments cannot be made.
3. When the adjustment is complete, press A-M
button
$
several times until the function mode
is reached.
Note:
• If you set the Z-ENHANCER function to ON (1 to
3), you cannot set the tone bypass.
Basic Operations
Adjusting the bass
1. Press A-M button
$
and select “BASS”.
2. Turning the Rotary knob
&
clockwise empha-
sizes the bass; turning it counterclockwise
attenuates the bass.
∗
The factory default setting is “0”. (Adjustment
range: –6 to +6)
∗
The bass cannot be adjusted if the tone by-
pass setting is “YES” (ON).
3. When the adjustment is complete, press A-M
button
$
several times until the function mode
is reached.
Adjusting the treble
1. Press A-M button
$
and select “TREBLE”.
2. Turning the Rotary knob
&
clockwise empha-
sizes the treble; turning it counterclockwise
attenuates the treble.
∗
The factory default setting is “0”. (Adjustment
range: –6 to +6)
∗
The treble cannot be adjusted if the tone by-
pass setting is “YES” (ON).
3. When the adjustment is complete, press A-M
button
$
several times until the function mode
is reached.
Adjusting the balance
1. Press A-M button
$
and select “BALANCE”.
2. Turning the Rotary knob
&
clockwise empha-
sizes the sound from the right speaker; turn-
ing it counterclockwise emphasizes the sound
from the left speaker.
∗
The factory default setting is “0”. (Adjustment
range: L13 to R13)
3. When the adjustment is complete, press A-M
button
$
several times until the function mode
is reached.
Adjusting the fader
1. Press A-M button
$
and select “FADER”.
2. Turning the Rotary knob
&
clockwise empha-
sizes the sound from the front speakers; turn-
ing it counterclockwise emphasizes the sound
from the rear speakers.
∗
The factory default setting is “0”. (Adjustment
range: F12 to R12)
3. When the adjustment is complete, press A-M
button
$
several times until the function mode
is reached.
