37
INSTALLATION
O
H
M
D
1
0
2
E
ng
lis
h
�
�
�
��
��
O
H
M
D
1
0
2
10. Carefully hold the overhead monitor system to the mounting
bracket . Align the mounting holes while screwing in the screws.
Make sure the wires are not in the way while mounting the monitor.
11. Connect the Red wire of the power harness to the Accessory
wire in the ignition harness.
12. Ground the Black wire of the power harness to a clean ground
spot.
Note: Make sure you keep the ground wire of the
OHMD102
and video source as short as possible to prevent any type of
unwanted vehicle noise
ohmd 102
3/16/05, 6:35 AM
37
