SOURCE COMMANDER MSS430
20
MSS430 S
PECIFICATIONS
Audio Specifications
Maximum Output:
4 V
p-p
(peak to peak)
Frequency Response:
30 Hz to 25 kHz
S/N Ratio (A-wtd):
60 dB
Input Sensitivity:
1.0 V
p-p
(peak to peak)
Input Impedance:
10k Ohms
Input/Output Gain:
0dB +/-2dB at Max volume with
600 Ohm load.
Video Specifications –
Output Level:
1.0 V
p-p
+/- 20% (peak to peak)
Frequency Response:
39 Hz to 5.5 MHz
Video Input/Output Gain: 0dB +/-2dB with 75 Ohm load
Input Sensitivity:
0V
p-p
+/- 20% (peak to peak)
Input Impedance:
75 Ohms
General Specifications –
Power Requirement:
10 V
d c
- 13 V
d c
Fuse Rating:
1.6 A
Dimensions (w x h x d): 9.84 x 1.06 x 5.24 in.
(250 x 27 x 133 mm)
C
ONTROL
S
PECIFICATIONS
Dimensions (w x h x d): 1.7 x 2.6 x .60 in.
(43 x 66 x 15 mm)
Mounting Depth:
.63 in. (16 mm); behind panel
Mounting Hole Diam.:
1.9 x 2.8 in. (48 x 72 mm)
Due to Clarion’s ongoing research and development, the product specifications and appearances
listed in this manual are subject to change without prior notice.
FCC S
TATEMENT
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 16 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruc-
tions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be verified by turning the unit off and on, the user is
encouraged to consult the dealer or an experienced radio/television techni-
cian for help.
